Trunk 

It is necessary to synchronize and configure the trunks as these are associated with a Carrier and this way you can charge the calls more accurately. There are also reports by trunks which help us verify if what the Carrier is charging is correct. To configure the trunks it is necessary to go to PBX/Trunks. 

The data to be configured are the following: 

  • Trunk Device, the name of the trunk as it appears in the call, for example in the case of Dahdi channels it is a number. 
  • Description, short description to identify the trunk 
  • Technology, type of trunk technology 
  • Pilot Number, number of pilot associated to the trunk, can be a DID or a telephone number that identifies the trunk. 
  • Carrier, the carrier that provides the service. Very important as this depends on how you will charge the calls that are taken by this trunk. 
What are your feelings
Updated on December 18, 2023